Hydraulic Piston Seals | CRC Distribution
Browse Categories

Piston Seals

Search in Category

Piston Seals

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Seals/Piston Seals/Piston Seals 
Viewing Page 41 of 182 (1,818 results)
PS1600-112 | PA-GTFE-7x0.287 | CRC Distribution Inc.

Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 6.305 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$55.83
/EA
PS1600-18 | PS, 1.125 X 0.912 X 0.088 TFG | CRC Distribution Inc.

Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 0.912 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$6.07
/EA
PS2031-80 | 5.000 X 4.408 X 0.312 Step Cut PS | CRC Distribution Inc.

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 4.408 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$37.44
/EA
PS2700-136 | 8.500 X 7.754 X 0.379 Piston Seal | CRC Distribution Inc.

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 7.754 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$58.03
/EA
PS2700-20 | 1.250 X 0.941 X 0.129 Piston Seal | CRC Distribution Inc.

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 0.941 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$9.76
/EA
PSA-2500 | PA-NEOFAB-1.875x2.5x0.75 | CRC Distribution Inc.

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split backups for extrusion resistance, and two split bearing rings. No further support bearings are required.

90A Durometer | Nitrile Material | 1 7/8 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$17.64
/EA

PS-PU-7×0.375

$30.00
/EA

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 3/4 in Nominal Inner Diameter | Piston T-Seal

$8.61
/EA

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 5 1/2 in Nominal Inner Diameter | Piston T-Seal

$45.28
/EA

Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.

92A Durometer | Urethane Material | 4 1/4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal

$32.45
/EA
  • « PREV
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • NEXT »