Piston Seals
Search in Category
Filter Your Search
Shop by Category
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 219 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
MPS, 340 X 315.5 X 8.1 Piston Seal
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 49.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 70 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
97A; 70A Durometer | Urethane Material | 179 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
63 X 44.7 X 7 Seal Step Cut NYL
The MPS2000 double acting piston seal is designed for heavy duty hydraulic applications. The small profile is resistant to shock loads and has high abrasion and extrusion resistance. Its split design allows simple installation on a solid piston.
Nylon Material | 139 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPS2000 double acting piston seal is designed for heavy duty hydraulic applications. The small profile is resistant to shock loads and has high abrasion and extrusion resistance. Its split design allows simple installation on a solid piston.
Nylon Material | 64.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPS2000 double acting piston seal is designed for heavy duty hydraulic applications. The small profile is resistant to shock loads and has high abrasion and extrusion resistance. Its split design allows simple installation on a solid piston.
Nylon Material | 69 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 15 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities