Piston Seals
Search in Category
Filter Your Search
Shop by Category
The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the “PSC” to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Hercules® Sealing Products also offers a wide base (WB) Style PSC piston seal. These wide base seals have the same characteristics of the standard PSC seals but offer a wider base, eliminating the need to use back-up rings to accommodate wider grooves. Piston diameter “I” dimensions are given for piston without wear rings.
95A; 70A Durometer | Polyurethane Material | 2 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
PS, 1 3/8 X 2 X .750 Piston Seal
Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.
92A Durometer | Urethane Material | 4 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.
92A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter | 5/16 in Cross Section | U-Seal
Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.
92A Durometer | Urethane Material | 5 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal
This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.
PTFE Material | 110 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
MCT, 215 X 192 X 16 Capped T Seal
A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
97A; 70A Durometer | Urethane Material | 119 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
97A; 70A Durometer | Urethane Material | 179 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 149 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities