Piston Seals
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
This two piece piston seal design comes made with a heat-stabilized, thermoplastic step-cut ring along with a profiled NBR energizer. This product offers extreme strength and resistance to extrusion, a very high resistance to abrasion, and ease of installation thanks to the step cut design and chamfered edges. The design also allows the seal to pass over ports without damage and offers greater resistance to surface roughness in comparison to any elastomer seals. The profiled energizer offers improved dynamic sealing ability, responding quickly to pressure changes and providing excellent sealing characteristics under a wide range of pressure conditions.
Glass Filled Nylon Material | 2.442 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal “L” bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. “L” bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons.
Fabric Reinforced Nitrile Material | 3 1/4 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the “PSC” to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Hercules® Sealing Products also offers a wide base (WB) Style PSC piston seal. These wide base seals have the same characteristics of the standard PSC seals but offer a wider base, eliminating the need to use back-up rings to accommodate wider grooves. Piston diameter “I” dimensions are given for piston without wear rings.
95A; 70A Durometer | Polyurethane Material | 2 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 1 1/2 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 3 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.
Buna-N Rubber Material | 5 3/4 in Nominal Inner Diameter | Piston T-Seal
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 104.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 110.8 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 114 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 209 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
