Browse Categories

Search Results

Filter Your Search

Show Attribute Category Group

Shop by Category

Loading...
Urethane Wiper | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 5 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$6.53
/EA
RW-80XNBR-1x1-3/8x0.212 - HW-1000N | CRC Distribution Inc.

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 1 in Nominal Inner Diameter

Features

  • Urethane Wiper Ring
  • Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
  • Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

$3.89
/EA

HWT-5000X3000 has a wall thickness of 1 in. The ID is 3 in and the OD is 5 in. The material is 1026 Carbon Steel.

Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

1-4$12.01
5-24$10.50
25-49$9.32
50+$8.40
/IN
at
Select Length
IN
-
IN

Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.

70A Durometer | PTFE Material | 34 MM Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$18.34
/EA
Light Duty Snap-in Wiper | CRC Distribution Inc.

This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.

Urethane Material | 40 MM Inner Diameter | Wiper

Features

  • Double-stepped shoulder

$3.60
/EA
3 7/8 X 4 1/8 X 1/8 O-ring NBR70 - 568-241 | CRC Distribution Inc.

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70 Durometer | Buna-N Rubber Material | 3 7/8 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring

Features

  • Pressure range varies according to diametral clearance
  • Temperature range of -40 °F to -240 °F

$0.85
/EA

ALHT3250X3000 has a 0.125 in wall thickness. The ID is 3 in and the OD is 3.25 in. The material is 6063-T832 Aluminum.

Seamless extruded and cold-drawn. Hard coated on the ID which gives the aluminum tube a tough, abrasive-resitant surface.

6063-T832 Aluminum is used for pneumatic cylinder applications requiring very good corrosion resistance and/or light weight. Can also be used for low-pressure oil cylinders (250 psi or less).

  • No machining required on the ID
  • Seamless extruded and cold-drawn
  • Hard coated interior
  • Corrosion resistance
  • Good weldability

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

1-14$5.88
15-29$4.70
30-104$3.36
105+$2.61
/IN
at
Select Length
IN
-
IN

ALUM-3000 has a 3 in diameter. The material is 6061 Aluminum T6

6061 Aluminum T6 is suitable for machining pistons and head glands.

The T6 refers to the temper or degree of hardness. T6 has been solution heat treated and artificially aged to provide the maximum yield strength for a 6061 aluminum alloy.

  • Heat treated and aged for increased strength
  • Easily formed
  • Weldable
  • Corrosion resistant

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

1-14$8.44
15-29$6.03
30+$4.68
/IN
at
Select Length
IN
-
IN

36mm induction hardened chrome shafting.

The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).

Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.

  • Greater strength
  • Better resistance to mechanical damage

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

1-14$5.85
15-29$3.90
30-89$2.93
90-134$2.60
135+$2.34
/IN
at
Select Length
IN
-
IN

MHT-110X134 has a wall thickness of 12 mm. The ID is 110 mm and the OD is 134 mm. The material is 1026 Carbon Steel and has been stress-relieved and annealed.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

1-14$14.49
15-44$11.25
45-104$10.13
105+$9.22
/IN
at
Select Length
IN
-
IN
  • « PREV
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • NEXT »