Search Results
Filter Your Search
Category Group
Shop by Category
Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications.
90A Durometer | Urethane Material | 1 in Nominal Inner Diameter | 5/32 in Cross Section | U-Seal
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 1 5/8 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
97A; 70A Durometer | Urethane Material | 84.5 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 42.2 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 53 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90A Durometer | Nitrile Material | 84.4 MM Nominal Inner Diameter | 3.1 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.
Retaining Ring
Features
- Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
Once installed in the groove of a shaft, the portion of the ring protruding from the groove holds an assembly in place.
0.693 in Nominal Inner Diameter | Retaining Ring
Features
- Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90 Durometer | Buna-N Rubber Material | 1 1/2 in Nominal Inner Diameter | 1/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90 Durometer | Buna-N Rubber Material | 5/16 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
