Search Results
Filter Your Search
Category Group
Shop by Category
Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications.
90A Durometer | Urethane Material | 1 in Nominal Inner Diameter | 5/32 in Cross Section | U-Seal
Backup rings are used in sealing and are designed to limit o-ring clearance gaps. They are used in high-pressure sealing situations.
95A Durometer | Urethane Material | 47 MM Nominal Inner Diameter | 3.5 MM Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 1 5/8 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70A Durometer | Nitrile Material | 14 MM Nominal Inner Diameter | 2 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 42.2 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90A Durometer | Nitrile Material | 84.4 MM Nominal Inner Diameter | 3.1 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.
70A Durometer | NBR Material | 38 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.
Urethane Material | 16 MM Nominal Inner Diameter | Rod U-Seal
Features
- Excellent low temperature performance
- Easy installation
This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.
Urethane Material | 80 MM Inner Diameter | Wiper
Features
- Double-stepped shoulder
