Search Results
Filter Your Search
Category Group
Shop by Category
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70 Durometer | Buna-N Rubber Material | 1 1/16 in Nominal Inner Diameter | 3/16 in Cross Section | O-Ring
Features
- Pressure range varies according to diametral clearance
- Temperature range of -40 °F to -240 °F
Piston cups are constructed of rubberized fabric. Cups with no hole are center punched.
Cotton Fabric & Rubber Material | Piston Cup
Features
- Constructed of rubberized fabric
- Center punched
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90A Durometer | Nitrile Material | 57 MM Nominal Inner Diameter | 3 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
90A Durometer | Nitrile Material | 84.4 MM Nominal Inner Diameter | 3.1 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 42.2 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
OP-25100075A has been machined to fit a 2.5 in cylinder bore and has a 0.75 in rod hole. The piston length is 1 in.
Piston is designed for an o-ring seal.
Matching seal kit is available.
PP-25150075A has been machined to fit a 2.5 in cylinder bore and has a 0.75 in rod hole. The piston length is 1.5 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
PP-35150100A has been machined to fit a 3.5 in cylinder bore and has a 1 in rod hole. The piston length is 1.5 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
PP-40150100A has been machined to fit a 4 in cylinder bore and has a 1 in rod hole. The piston length is 1.5 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
PP-40175125A has been machined to fit a 4 in cylinder bore and has a 1.25 in rod hole. The piston length is 1.75 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
