Wipers

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 3/8 in Nominal Inner Diameter

Features

• Flexible enough to snap into a groove
• Wipers are constructed of fluorocarbon

RW-PE-5.000×5.750×0.375

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 6 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
• Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

Double lip wiper with integrated pressure relief function incorporating special sealing and wiping edges.

94A Durometer | Urethane Material | 25 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.

Urethane Material | 75 MM Inner Diameter | Wiper

Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.

Urethane Material | 110 MM Inner Diameter | Wiper

Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.

Urethane Material | 200 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 14 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 40 MM Inner Diameter | Wiper

Style MSWH24 wipers are molded in Zurcon® Z201urethane. This double-acting wiper is designed for severe operating conditions.

92A Durometer | Urethane Material | 60 MM Inner Diameter | Wiper