Wipers

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 32 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 50 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 75 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 90 MM Nominal Inner Diameter | Wiper

Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.

90A Durometer | Urethane Material | 3 1/2 in Nominal Inner Diameter

Features

• Installed in hydraulic cylinders to prevent dirt, dust, and moistures
• Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components

Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter

Features

• Slotted heel design
• Slots in the heel allow excess hydraulic fluid to bypass the wiper

Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Carboxilated Nitrile Material | 1 1/4 in Nominal Inner Diameter

Features

• Slotted heel design
• Slots in the heel allow excess hydraulic fluid to bypass the wiper

Style AN-M2 scrapers conform to MS28776-M2 sizes and are manufactured in brass. The scrapers are suitable for extreme environments with aggressive contaminants. The unique spring-loaded construction and ductile material result in close rod contact even when coping with rod ovality and helix grinding patterns.

Brass Material | 2 1/2 in Nominal Inner Diameter

Features

• Scrapers are suitable for extreme environments with aggressive contaminants
• Unique spring-loaded construction
• Manufactured in brass

Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter

Features

• Slotted heel design
• Slots in the heel allow excess hydraulic fluid to bypass the wiper

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems.

AN wipers will retrofit into glands prescribed in MS-33675 for corresponding dash numbers of MS-28776.

• Flexible, snap-in design for easy installation into closed housings
• Low compression set