Wipers
Filter Your Search
Shop by Category
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
Urethane Material | 160 MM Inner Diameter | Wiper
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
Urethane Material | 75 MM Inner Diameter | Wiper
This medium duty wiper is molded in nitrile rubber.
Nitrile Material | 32 MM Inner Diameter | Wiper
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
90A Durometer | Urethane Material | 5 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
The ST-XLFT was developed for hard environments, particularly longwall mining. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal.
93A Durometer | Urethane Material | 6 in Nominal Inner Diameter
Features
- Include a dust lip to prevent contaminates from entering through the groove
- Ribbed inside diameter for low friction operation
- Prevent pressure traps between the wiper and rod seal
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the OD of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
Urethane Material | 2 in Nominal Inner Diameter
Features
- Designed to retrofit the standard ST wiper groove
- O-ring energizer limits dirt intrusion around the OD of the wiper
Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.
70A Durometer | 660 Bronze; Nitrile Material | 2 1/2 in Nominal Inner Diameter | Wiper
Molded in nitrile with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
Urethane Material | 80 MM Nominal Inner Diameter | Dust Seal
MRW, 70mm Brass Cad Plated Rod Wiper