Wipers

Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.

Urethane Material | 55 MM Inner Diameter | Wiper

Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.

Urethane Material | 56 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 14 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 31.5 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 40 MM Inner Diameter | Wiper

The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

55D Durometer | Polyester Material | 110 MM Inner Diameter | Wiper

Features

• Crush lip design provides effective seal on housing
• Ribs relieve pressure and improve stability
• Effective scraping lip to scrape off heavily deposited containments including ice

RW-55D URE-125.00×140.00×10.20

The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

55D Durometer | Polyester Material | 32 MM Inner Diameter | Wiper

Features

• Crush lip design provides effective seal on housing
• Ribs relieve pressure and improve stability
• Effective scraping lip to scrape off heavily deposited containments including ice

RW-55D URE-75.00×87.20×7.20

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 25 MM Inner Diameter | Wiper