Browse Categories

Wipers

Filter Your Search

Show Attribute Nominal Height
Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...

Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.

90A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter

Features

  • Installed in hydraulic cylinders to prevent dirt, dust, and moistures
  • Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components

$14.22
/EA

Cadmium plated with gold chromate to QQL-614 and are inspected for required radial pressure, breakout friction, and rod light-tightness per spec. Manufactured to the MS28776 specification in accordance with the MIL-S-5049 procurement standard.

AM scrapers are typically used in heavy duty hydraulics like aircraft landing gear and steel mill cylinders.

Seal Options

  • Solid scraping body only
  • Scraping body with a narrow groove accommodating a serpentine form spring to scraping load
  • Scraping body with a wide groove in the outside diameter accommodating two “c” style springs (resembling split washers) to generate scraping load
$120.26
/EA
AN-10 | 1 1/16 X 1.336 X .107 AN Wiper URE | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 1 1/16 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$1.43
/EA
AN-21PM | RWAN, 2 X 2.302 X .107 AN POLYESTER | CRC Distribution Inc.

RWAN, 2 X 2.302 X .107 AN POLYESTER

$21.26
/EA
AN-22 | 2 1/8 X 2.429 X .107 AN Wiper URE | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 2 1/8 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$2.52
/EA
AN-22-M2 | RWA, 2.125 AN Brass Cad Plated Wiper | CRC Distribution Inc.

RWA, 2.125 AN Brass Cad Plated Wiper

$29.21
/EA
AN-16 | 1 7/16 X 1.741 X .107 AN Wiper URE | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 1 7/16 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$2.28
/EA
AN-26 | 2 5/8 X 2.991 X .122 AN Wiper URE | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 2 5/8 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$3.03
/EA

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 4 in Nominal Inner Diameter

Features

  • Urethane Wiper Ring
  • Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
  • Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

$66.67
/EA

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

$34.30
/EA
  • « PREV
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • NEXT »
Seals/Wipers