Wipers
Filter Your Search
Shop by Category
This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.
Urethane Material | 30 MM Nominal Inner Diameter | Wiper
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
Urethane Material | 45 MM Inner Diameter | Wiper
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
Urethane Material | 160 MM Inner Diameter | Wiper
This medium duty wiper is molded in nitrile rubber.
Nitrile Material | 28 MM Inner Diameter | Wiper
This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.
Urethane Material | 40 MM Inner Diameter | Wiper
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.
55D Durometer | Polyester Material | 30 MM Inner Diameter | Wiper
Features
- Crush lip design provides effective seal on housing
- Ribs relieve pressure and improve stability
- Effective scraping lip to scrape off heavily deposited containments including ice
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.
90A Durometer | Fluorocarbon Material | 2 1/2 in Nominal Inner Diameter
Features
- Flexible enough to snap into a groove
- Wipers are constructed of fluorocarbon
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
90A Durometer | Urethane Material | 4 1/2 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the OD of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
Urethane Material | 4 in Nominal Inner Diameter
Features
- Designed to retrofit the standard ST wiper groove
- O-ring energizer limits dirt intrusion around the OD of the wiper