Wipers

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 2 1/8 in Nominal Inner Diameter

Features

• Flexible, snap-in design for easy installation into closed housings
• Low compression set

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 5 3/4 in Nominal Inner Diameter

Features

• Flexible, snap-in design for easy installation into closed housings
• Low compression set

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.

Urethane Material | 25 MM Inner Diameter | Wiper

MRWD, 35 X 43.6 X 5.3 Metric D Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 110 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 56 MM Inner Diameter | Wiper

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 80 MM Inner Diameter | Wiper

This medium duty wiper is molded in nitrile rubber.

Nitrile Material | 56 MM Inner Diameter | Wiper

This medium duty wiper is molded in nitrile rubber.

Nitrile Material | 70 MM Inner Diameter | Wiper