Piston Seals
Search in Category
Filter Your Search
Category Group
Durometer
Material
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Molded from tough, wear resistant 55D polyester, these seals are for light to medium duty applications and are interchangeable with the style MPS seals of the same dimensions. Nitrile rings are used for energizers.
55D; 70A Durometer | Polyester Material | 64 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 1 7/16 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 1 15/16 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 3 11/16 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 4 1/2 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1850 piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.
Bronze Filled PTFE Material | 7 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1850-V piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 7 1/4 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1850 piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.
Bronze Filled PTFE Material | 8 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions – O-rings, O-rings with back-ups, T-seals, U-seals, etc. Piston diameter “I” dimensions are given for pistons without wear rings.
60D & 57A Durometer | Urethane Composite Material | 2 1/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.
Buna-N Rubber Material | 6 1/2 in Nominal Inner Diameter | Piston T-Seal
