Piston Seals

Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.

70A Durometer | PTFE Material | 99.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.

70A Durometer | NBR Material | 75 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.

94A; 70/80A Durometer | Urethane Material | 89 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.

94A; 70/80A Durometer | Urethane Material | 74.5 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The PS1850-V piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 3 7/16 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The PS1850-V piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 4 7/16 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter “I” dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

Glass Filled Nylon Material | 2.712 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.

40% Bronze Filled PTFE Material | 4 3/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Piston diameter “I” dimensions are given for pistons without wear rings.

Glass Filled Nylon Material | 4.442 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Compact and easy to install, the Style PSA-65 piston seal is a simple and economical design for pressures up to 3,000 PSI. The assembly consists of a nitrile rubber seal and two polyacetal bearings to support the piston. For 1-piece pistons.

Nitrile Material | 2 1/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities