Piston Seals

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.

70A Durometer | NBR Material | 60 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures positive contact with the dynamic surface. The PS1400 is designed to fit ANSI/B93.32-1973 groove standards. Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 4.608 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 2.223 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.

40% Bronze Filled PTFE Material | 3 3/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from 93 Shore A polyurethane with a 70 Shore A energizer, this seal utilizes the same groove dimensions as a standard o-ring or T-seal. One or two Style 575 back-up rings may be used for wider grooves. Extrusion resistant by design, this seal is also resistant to rolling and twisting. Installation is an easy two step snap-in procedure with no need to re-size before insertion into the bore. Piston diameter “I” dimensions are given for pistons without wear rings.

93A; 70A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Piston diameter “I” dimensions are given for pistons without wear rings.

40% Bronze Filled PTFE Material | 1.884 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The PS1850 piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. Piston diameter “I” dimensions are given for pistons without wear rings.

Bronze Filled PTFE Material | 2 3/16 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.

40% Bronze Filled PTFE Material | 2 5/8 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the “PSC” to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Hercules® Sealing Products also offers a wide base (WB) Style PSC piston seal. These wide base seals have the same characteristics of the standard PSC seals but offer a wider base, eliminating the need to use back-up rings to accommodate wider grooves. Piston diameter “I” dimensions are given for piston without wear rings.

95A; 70A Durometer | Polyurethane Material | 1 1/4 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Piston diameter “I” dimensions are given for pistons without wear rings.

40% Bronze Filled PTFE Material | 2.884 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities