Search Results

Hydrogenated Nitrile Rubber (HNBR), also known as Highly Saturated Nitrile (HSN), is a compound with superior heat, ozone, chemical resistance, tensile strength and abrasion resistance over natural rubber. HNBR provides excellent service life in most sealing applications such as oilfield, automotive and refrigerants.

70 Durometer | Highly Saturated Nitrile Material | 2 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring

Features

• Chemical resistance
• Tensile strength
• Abrasion resistance
• Excellent service life in most sealing applications such as oilfield, automotive and refrigerants

O-ring

O-Ring

O-ring

O-Ring

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

90 Durometer | Buna-N Rubber Material | 4 1/2 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring

Features

• Pressure range varies according to diametral clearance
• Temperature range of -40 °F to -240 °F

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70 Durometer | Buna-N Rubber Material | 5 1/4 in Nominal Inner Diameter | 1/8 in Cross Section | O-Ring

Features

• Pressure range varies according to diametral clearance
• Temperature range of -40 °F to -240 °F

CPLUG-NYL-9/16-18-3/8(20)

Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.

70A Durometer | PTFE Material | 37 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.

Urethane Material | 32 MM Inner Diameter | Wiper

Features

• Double-stepped shoulder

CPOD1750X654 has a wall thickness of 0.548 in. The ID is 0.654 in and the OD is 1.75 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

5 in induction hardened chrome shafting.

The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).

Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.

• Greater strength
• Better resistance to mechanical damage

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.