Search Results

Machined from 1018 Carbon Steel for a 5 in cylinder.

The length is 0.75 in and the lip is 0.375 in in tall.

Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.

CPOD1000X750 has a wall thickness of 0.125 in. The ID is 0.75 in and the OD is 1 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

Style AN-M2 scrapers conform to MS28776-M2 sizes and are manufactured in brass. The scrapers are suitable for extreme environments with aggressive contaminants. The unique spring-loaded construction and ductile material result in close rod contact even when coping with rod ovality and helix grinding patterns.

Brass Material | 3 1/2 in Nominal Inner Diameter

Features

• Scrapers are suitable for extreme environments with aggressive contaminants
• Unique spring-loaded construction
• Manufactured in brass

DE-17 is a standard rod eye machined from Cast Iron.

A rod eye is a type of mount attached to the end of the cylinder rod. This connects to a mounting point on the machine and usually incorporates a bearing to allow for some movement.

DEB-05 has a 0.5 in pin diameter.

The detachable eye bracket mounts to the rear end of a cylinder and helps prevent sideloading and wear. Can be used with hydraulic cylinders that have a standard bore size.

Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.

92A Durometer | Urethane Material | 1 1/2 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

HWT-8000X6000 has a wall thickness of 1 in. The ID is 6 in and the OD is 8 in. The material is 1026 Carbon Steel.

Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

Rubber Material | 1 1/4 in Nominal Inner Diameter | Wiper

Rubber Material | 1 1/4 in Nominal Inner Diameter | Wiper

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 60 MM Nominal Inner Diameter | 3.5 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 90 MM Nominal Inner Diameter | 4 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F