Search Results
Filter Your Search
Shop by Category
WR-NYL, 5 1/2 X 1 Wear Ring
Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.
92A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal
95mm induction hardened chrome shafting.
The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
1-29 | $23.64 |
30-59 | $16.90 |
60-119 | $13.12 |
120-287 | $11.82 |
288+ | $10.75 |
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 1 7/8 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
WR-NYL, 3 X 3/8 Wear Ring
Solid Teflon backup ring with a flat cross-section.
PTFE can withstand high temperatures and is compatible with nearly all fluids.
PTFE Material | 2 1/8 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
- Deals very well with surface wear
WR-NYL, 3 1/2 X 3/8 Wear Ring
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 2 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
Urethane Material | 50 MM Nominal Inner Diameter | Wiper
This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.
Urethane Material | 40 MM Nominal Inner Diameter | Wiper