Search Results
Filter Your Search
Category Group
Shop by Category
Style AN-M2 scrapers conform to MS28776-M2 sizes and are manufactured in brass. The scrapers are suitable for extreme environments with aggressive contaminants. The unique spring-loaded construction and ductile material result in close rod contact even when coping with rod ovality and helix grinding patterns.
Brass Material | 4 in Nominal Inner Diameter
Features
- Scrapers are suitable for extreme environments with aggressive contaminants
- Unique spring-loaded construction
- Manufactured in brass
CPOD4000X3000 has a wall thickness of 0.5 in. The ID is 3 in and the OD is 4 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $27.96 |
| 15-29 | $23.27 |
| 30-59 | $17.47 |
| 60-104 | $15.52 |
| 105+ | $13.98 |
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 5.02 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
Threaded at the base with a pin hole inside of the spherical bearing. Order to fit piston rod thread size.
Threaded at the base with a pin hole inside of the spherical bearing. Order to fit piston rod thread size.
Threaded at the base with a pin hole inside of the spherical bearing. Order to fit piston rod thread size.
Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.
92A Durometer | Urethane Material | 2 3/4 in Nominal Inner Diameter | 3/8 in Cross Section | U-Seal
DUCT-14000 has a diameter of 14 in. The material is 65-45-12 Ductile Iron.
65-45-12 Ductile Iron is used to machine pistons, glands, caps, manifolds, rams, and valve bodies.
Ductile has higher machining speeds than steel and there is usually no need for deburring machined parts. The graphite flakes in the material act as a self-lubricant. Ductile can be flame or induction hardened as well as deep hardened.
Ductile bars are produced with sufficient stock on the outside diameter to ensure clean-up at the nominal dimension.
- Excellent machinability
- Optimal impact strengths
- Optimal fatigue properties
- Optimal electrical conductivity
- High magnetic permeability
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-9 | $174.84 |
| 10-39 | $155.26 |
| 40+ | $127.28 |
DUCT-8500 has a diameter of 8.5 in. The material is 65-45-12 Ductile Iron.
65-45-12 Ductile Iron is used to machine pistons, glands, caps, manifolds, rams, and valve bodies.
Ductile has higher machining speeds than steel and there is usually no need for deburring machined parts. The graphite flakes in the material act as a self-lubricant. Ductile can be flame or induction hardened as well as deep hardened.
Ductile bars are produced with sufficient stock on the outside diameter to ensure clean-up at the nominal dimension.
- Excellent machinability
- Optimal impact strengths
- Optimal fatigue properties
- Optimal electrical conductivity
- High magnetic permeability
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-9 | $57.64 |
| 10-39 | $51.18 |
| 40+ | $41.96 |
