Browse Categories

Search Results

Filter Your Search

Show Attribute Category Group

Shop by Category

Loading...

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 70 MM Inner Diameter | Wiper

$21.90
/EA

Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.

Urethane Material | 70 MM Inner Diameter | Wiper

$8.75
/EA
RW-90URE-40x48x4 - MSWP-40X48X4 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 40 MM Inner Diameter | Wiper

$8.99
/EA
PUS-80NBR-80X68X8.5 - MUKPN-80X68X8.5 | CRC Distribution Inc.

MUKPN is an asymmetrical single-acting pneumatic piston seal. Molded in nitrile, this seal is resistant to water and most oils while maintaining good low-pressure sealing.

80A Durometer | NBR Material | 68 MM Nominal Inner Diameter | Piston Seal

$13.25
/EA

Molded from tough polyurethane material, these seals offer high resistance to wear and abrasion. Energized with a four-lobed ring, they have greatly increased low pressure performance.

Urethane Material | 65 MM Nominal Inner Diameter | U-Seal

$18.51
/EA

Fabric/Rubber Material | 56 MM Nominal Inner Diameter | VEE Packing

Fabric/Rubber Material | 56 MM Nominal Inner Diameter | VEE Packing

$73.13
/EA

Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.

Urethane Material | 28 MM Nominal Inner Diameter | U-Seal

$6.96
/EA

Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.

Urethane Material | 55 MM Nominal Inner Diameter | U-Seal

$12.83
/EA

This wear ring is molded from glass reinforced nylon. This style is highly recommended because of their wear rate and non-scoring properties and their ability to ingest metal chips.

Nylon Material | 45 MM Nominal Inner Diameter | Wear Ring

Features

  • Protection Against Wear
  • Reduced Friction
  • Extended Cylinder Life
  • Operational Efficiency

$41.43
/EA

WR-PHEN-35X9.5X2.5

$5.47
/EA
  • « PREV
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • NEXT »