Search Results

Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.

Urethane Material | 55 MM Nominal Inner Diameter | Dust Seal

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 75 MM Nominal Inner Diameter | Wiper

This seal is single cased with a urethane lip and used to exclude contaminants from cylinder link pins.

Nitrile Material | 75 MM Nominal Inner Diameter | Dust Seal

This seal is single cased with a urethane lip and used to exclude contaminants from cylinder link pins.

Nitrile Material | 90 MM Nominal Inner Diameter | Dust Seal

8.500 X 7.665 X 0.375 Piston Seal

Once installed in the groove of a housing, the portion of the ring protruding from the groove holds an assembly in place.

1.377 in Nominal Inner Diameter | Retaining Ring

Features

• Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.

70A Durometer | Filled PTFE Buffer Material | 55 MM Nominal Inner Diameter | Buffer Seal

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 110 MM Nominal Inner Diameter | 2.5 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 11 MM Nominal Inner Diameter | 2 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F

O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.

70A Durometer | Nitrile Material | 125 MM Nominal Inner Diameter | 3 MM Cross Section | O-Ring

Features

• Chemical resistance
• Temperature range of -40 °F to 220 °F