Search Results

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 3 7/8 in Nominal Inner Diameter

Features

• Crush lip to provide extra interference
• Bead on the shoulder to keep contaminants out
• Ribbed ID to prevent pressure traps

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 25 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 35 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 45 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 50 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 50 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 56 MM Nominal Inner Diameter | Buffer Seal

BR-TFE/FKM-59.00×74.10×5.90(6.30)

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 63 MM Nominal Inner Diameter | Buffer Seal

Molded in bronze-filled PTFE with an FKM energizer, this seal is used to protect the primary seal from damage caused by pressure spikes and excessive heat build up.

Bronze PTFE Buffer Material | 160 MM Nominal Inner Diameter | Buffer Seal