Search Results

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 40 MM Nominal Inner Diameter | Wiper

This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.

Urethane Material | 35 MM Nominal Inner Diameter | Wiper

This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.

Nitrile Material | 30 MM Nominal Inner Diameter | Wiper

Molded from tough, wear resistant 55D polyester, these seals are for light to medium duty applications and are interchangeable with the style MPS seals of the same dimensions. Nitrile rings are used for energizers.

55D; 70A Durometer | Polyester Material | 57 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.

Urethane Material | 30 MM Nominal Inner Diameter | U-Seal

Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.

Urethane Material | 55 MM Nominal Inner Diameter | Rod U-Seal

Features

• Excellent low temperature performance
• Easy installation

Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design, they can be used in rod or piston applications. E= European Urethane.

Urethane Material | 63 MM Nominal Inner Diameter | U-Seal

Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.

Urethane Material | 20 MM Nominal Inner Diameter | Rod U-Seal

Features

• Excellent low temperature performance
• Easy installation

Molded in a tough urethane, this seal employs an additional lip near the heel. The twin lip design provides stability, friction-reducing lube retention, and some contaminant resistance. VME – Secondary lip is further from heel than standard MRTU. NOTE: E = European Urethane.

Urethane Material | 30 MM Nominal Inner Diameter | Rod U-Seal

Features

• Excellent low temperature performance
• Easy installation

Hercules® Sealing Products is pleased to introduce our new line of PowerbandTM tight tolerance premium wearrings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, PowerbandsTM offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a Coefficient of Friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever. All PowerbandsTM are fully machined with cross-section tolerances of only ±0.001”, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025”, this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. PowerbandsTM are currently available in our most popular wear-ring dimensions.

1 1/4 in Nominal Inner Diameter | Powerband

Features

• PowerbandsTM offer a high strength wear-ring for all cylinder applications
• Fully machined with cross-section tolerances of only ±0.001
• Chamfered corners
• Scarf or angle-cut end gaps