Search Results

DEB-13 has a 1.375 in pin diameter.

The detachable eye bracket mounts to the rear end of a cylinder and helps prevent sideloading and wear. Can be used with hydraulic cylinders that have a standard bore size.

1.75 in clevis pin with 0.068 in grooves machined into each end to fit two retaining rings. Retaining rings are not included.

Pivot pins with grooves are meant to be used on a hydraulic cylinder that extends and retracts a telescoping lift arm.

Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our, Heavy Duty Rod and Piston U-Seals.

92A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter | 1/8 in Cross Section | U-Seal

56 mm Rod Kit

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 1 3/4 in Nominal Inner Diameter | Buffer Seal

RB, 8 X 8.807 X 0.319 Buffer NBR DS129

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 130 MM Nominal Inner Diameter | 5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.

PTFE Material | 95 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.

Urethane Material | 55 MM Nominal Inner Diameter | Wiper

Molded from tough, wear resistant 55D polyester, these seals are for light to medium duty applications and are interchangeable with the style MPS seals of the same dimensions. Nitrile rings are used for energizers.

55D; 70A Durometer | Polyester Material | 119 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities