Search Results
Filter Your Search
Category Group
Shop by Category
660-1000X3000 has a 1 in thick wall. The ID is 1 in and the OD is 3 in. The material is 660 Bronze Copper Alloy 932.
660 Bronze is used for machining bearings, bushings, wear strips, and plates. This grade of bronze is used in pump, cylinder, and machine tool applications.
- Long life span
- Machinability rating of 70
- Not subject to dezincification
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $36.55 |
| 5-9 | $32.46 |
| 10-14 | $29.24 |
| 15+ | $26.61 |
Style 870 u-seals are precision molded from Buna-N synthetic rubber. Style 870 u-seal numbers conform in size to Army-Navy specification AN6226.
70A Durometer | Buna-N Rubber Material | 3 1/4 in Nominal Inner Diameter | U-Seal
DEB-10 has a 1 in pin diameter.
The detachable eye bracket mounts to the rear end of a cylinder and helps prevent sideloading and wear. Can be used with hydraulic cylinders that have a standard bore size.
DEB-13 has a 1.375 in pin diameter.
The detachable eye bracket mounts to the rear end of a cylinder and helps prevent sideloading and wear. Can be used with hydraulic cylinders that have a standard bore size.
1.75 in clevis pin with 0.068 in grooves machined into each end to fit two retaining rings. Retaining rings are not included.
Pivot pins with grooves are meant to be used on a hydraulic cylinder that extends and retracts a telescoping lift arm.
O-rings as elastic loops that seal static and dynamic applications. They are used to seal the space between cylinders, pistons, pipes and tubes and can be made from various materials.
70A Durometer | Nitrile Material | 70 MM Nominal Inner Diameter | 3 MM Cross Section | O-Ring
Features
- Chemical resistance
- Temperature range of -40 °F to 220 °F
Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.
95A Durometer | Urethane Material | 3 5/8 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal
Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.
95A Durometer | Urethane Material | 2 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal
Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.
95A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal
Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.
95A Durometer | Urethane Material | 3 1/2 in Nominal Inner Diameter | 7/32 in Cross Section | U-Seal
