Browse Categories

Piston Seals

Search in Category

Piston Seals

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...
Seals/Piston Seals/Piston Seals 
Viewing Page 61 of 182 (1,818 results)
PS2700-116 | 7.250 X 6.504 X 0.379 Piston Seal | CRC Distribution Inc.

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 6.504 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$46.78
/EA

9.500 X 8.637 X 0.379 Piston Seal

$22.93
/EA
PS2700-28 | 1.750 X 1.441 X 0.129 Piston Seal | CRC Distribution Inc.

This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.

55D Durometer | Glass/PTFE Filled Polyurethane Material | 1.441 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$8.64
/EA

2.750 X 2.212 X 0.282 Step Cut PS

$23.51
/EA

This two piece piston seal design comes made with a heat-stabilized, thermoplastic step-cut ring along with a profiled NBR energizer. This product offers extreme strength and resistance to extrusion, a very high resistance to abrasion, and ease of installation thanks to the step cut design and chamfered edges. The design also allows the seal to pass over ports without damage and offers greater resistance to surface roughness in comparison to any elastomer seals. The profiled energizer offers improved dynamic sealing ability, responding quickly to pressure changes and providing excellent sealing characteristics under a wide range of pressure conditions.

Glass Filled Nylon Material | 3.942 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$34.32
/EA

This two piece piston seal design comes made with a heat-stabilized, thermoplastic step-cut ring along with a profiled NBR energizer. This product offers extreme strength and resistance to extrusion, a very high resistance to abrasion, and ease of installation thanks to the step cut design and chamfered edges. The design also allows the seal to pass over ports without damage and offers greater resistance to surface roughness in comparison to any elastomer seals. The profiled energizer offers improved dynamic sealing ability, responding quickly to pressure changes and providing excellent sealing characteristics under a wide range of pressure conditions.

Glass Filled Nylon Material | 6.24 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$106.55
/EA

7.500 X 6.740 X 0.375 Step Cut PS

$59.39
/EA

9.000 X 8.124 X 0.375 Step Cut PS

$73.96
/EA
PSA-3500A | PA-NEOFAB-2.85x3.5x0.772 | CRC Distribution Inc.

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split backups for extrusion resistance, and two split bearing rings. No further support bearings are required.

90A Durometer | Nitrile Material | 2.85 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$32.48
/EA
PSA-58-2000 | PA-NEOFAB-1.375x2x0.937 | CRC Distribution Inc.

Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal “L” bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. “L” bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons.

Fabric Reinforced Nitrile Material | 1 3/8 in Nominal Inner Diameter | Piston Seal

Features

  • Easy assembly
  • Low friction capabilities

$39.49
/EA
  • « PREV
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • NEXT »