Piston Seals
Search in Category
Filter Your Search
Shop by Category
Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.
40% Bronze Filled PTFE Material | 2 5/16 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.
40% Bronze Filled PTFE Material | 5 3/8 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.
40% Bronze Filled PTFE Material | 6 21/32 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Molded from a PTFE base material with 40% bronze and machined to exacting tolerances, this seal exhibits low friction and high strength corners are chamfered for cold flow resistance.
40% Bronze Filled PTFE Material | 9 5/32 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
5.750 X 4.925 X 0.319 TFB
This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.
55D Durometer | Glass/PTFE Filled Polyurethane Material | 5.504 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.
55D Durometer | Glass/PTFE Filled Polyurethane Material | 6.504 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
9.500 X 8.637 X 0.379 Piston Seal
This seal, molded from high grade 55D polyurethane, may retrofit the PS1800 seals, considering all dimensions are comparable. This seal material, with a high degree of memory, stretches over the piston and snaps in the groove for immediate assembly. These seals also feature low friction and high abrasion and extrusion resistance which helps to eliminate assembly damage. Piston diameter “I” dimensions are given for pistons without wear rings.
55D Durometer | Glass/PTFE Filled Polyurethane Material | 1.441 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities