Piston Seals
Search in Category
Filter Your Search
Shop by Category
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 5.02 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 7.774 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended, service life and maximum reliability in piston sealing.
92A Durometer | Urethane Material | 7 in Nominal Inner Diameter | 1/2 in Cross Section | U-Seal
Molded from filled PTFE and machined to close tolerances, these seals feature low friction and excellent wear characteristics. Nitrile rings are used for energizers.
70A Durometer | PTFE Material | 104 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The MPSU300 is a compact, double-acting piston seal consisting of two parts: a urethane sealing ring with a pronounced sealing edge and a rectangular nitrile energizer to prevent the seal from twisting within the groove. It also has low friction and smooth operating movement even at low linear velocities.
94A; 70/80A Durometer | Urethane Material | 55 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Totally interchangeable with Style PS1400 PTFE piston seals, Style PS1500 piston seals are molded from tough 60 Shore D durometer polyurethane. During the molding process, a .002” thick band of molybdenum disulfide is molded into the outside diameter of the seal ring for reduced friction. PS1500 piston seals are easily stretched over the piston and recover rapidly with the elimination of the “cold flow” characteristics found in PTFE seals. Piston diameter “I” dimensions are given for pistons without wear rings.
60 Shore D Durometer | Polyurethane Material | 3.356 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 1.537 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Manufactured from 55 Shore D polyester reinforced with <5% glass fiber, style PS1704 offers compact, low friction sealing for light to medium duty hydraulic cylinders. Style PS1704 is easily stretched over the piston without needing to be resized as in the PS1400 seals. Directly interchangeable with style PS1400 and PS1500 piston seals. Piston diameter “I” dimensions are given for pistons without wear rings.
70A Durometer | Poly-Trel™ Thermoplastic Material | 5.482 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures positive contact with the dynamic surface. The PS1400 is designed to fit ANSI/B93.32-1973 groove standards. Piston diameter “I” dimensions are given for pistons without wear rings.
15% Glass Filled PTFE Material | 6.482 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Piston diameter “I” dimensions are given for pistons without wear rings.
40% Bronze Filled PTFE Material | 5.66 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities