Search Results

JIC 0750 X.049 has a 0.75 in in OD and a 0.049 in in thick wall.

JIC tubing is sold in 20 ft. lengths only. Tubes can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.

Cold drawn and annealed seamless low carbon steel. This tubing is intended for use as hydraulic lines and in other applications requiring flaring and bending.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 1 1/4 in Nominal Inner Diameter | Buffer Seal

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 2 3/4 in Nominal Inner Diameter | Buffer Seal

Filled PTFE back-up rings primarily used with U-seals.

Filled PTFE Material | 56 MM Nominal Inner Diameter | 5 MM Cross Section | U-Seal Back-Up Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 60 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 65 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

Backup rings are used in sealing and are designed to limit o-ring clearance gaps. They are used in high-pressure sealing situations.

95A Durometer | Urethane Material | 80 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

92A Durometer | Urethane Material | 2 1/4 in Nominal Inner Diameter | Wiper

92A Durometer | Urethane Material | 3 in Nominal Inner Diameter | Wiper

92A Durometer | Urethane Material | 3 in Nominal Inner Diameter | Wiper

Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.

Urethane Material | 20 MM Nominal Inner Diameter | Wiper