Search Results

HT-9500X8000 has a wall thickness of 0.75 in. The ID is 8 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.

Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.

Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications.

90A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter | 5/32 in Cross Section | U-Seal

Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications.

90A Durometer | Urethane Material | 1 3/4 in Nominal Inner Diameter | 3/16 in Cross Section | U-Seal

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 5/8 in Nominal Inner Diameter

Features

• Urethane Wiper Ring
• Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
• Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

1-1/2 X 3

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.

Bronze Filled PTFE Material | 3 3/4 in Nominal Inner Diameter | Buffer Seal

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 115 MM Nominal Inner Diameter | 5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

MBU, 175 X 5 X 1.9 Metric B/U PTFE

Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.

PTFE Material | 180 MM Nominal Inner Diameter | 5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation

Backup rings are used in sealing and are designed to limit o-ring clearance gaps. They are used in high-pressure sealing situations.

95A Durometer | Urethane Material | 58 MM Nominal Inner Diameter | 2.5 MM Cross Section | Backup Ring

Features

• High strength and abrasion resistance
• Wide temperature range
• Chemical resistance
• Low friction
• Easy installation