Search Results
Filter Your Search
Category Group
Shop by Category
Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.
Nylon Material | 4 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Features
- Scarf Cut wear ring
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
Wear rings provide a hard-wearing surface that protects the cylinder walls and the piston rod from scoring and abrasion. By maintaining alignment and reducing side loads, these rings facilitate smoother piston movement and lower friction levels.
Nylon Material | 7 in Nominal Inner Diameter | 1/8 in Cross Section | Wear Ring
Features
- Scarf Cut wear ring
- Protection Against Wear
- Reduced Friction
- Extended Cylinder Life
- Operational Efficiency
CPO-7000 has a 7 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $82.92 |
| 15-29 | $59.28 |
| 30-59 | $51.82 |
| 60-119 | $41.46 |
| 120+ | $37.73 |
CPOD1750X1000 has a wall thickness of 0.375 in. The ID is 1 in and the OD is 1.75 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.20 |
| 15-29 | $7.66 |
| 30-59 | $5.75 |
| 60-104 | $5.11 |
| 105+ | $4.60 |
CPOD3000X2500 has a wall thickness of 0.25 in. The ID is 2.5 in and the OD is 3 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $7.83 |
| 15-29 | $6.52 |
| 30-59 | $4.90 |
| 60-104 | $4.35 |
| 105+ | $3.92 |
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 4.52 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 4.77 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.
PTFE Material | 75 MM Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
