Search Results
Filter Your Search
Category Group
Shop by Category
HT-6250X5500 has a wall thickness of 0.375 in. The ID is 5.5 in and the OD is 6.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $12.05 |
| 15-59 | $10.54 |
| 60-104 | $9.36 |
| 105+ | $8.43 |
HT-9500X8000 has a wall thickness of 0.75 in. The ID is 8 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $42.50 |
| 15-59 | $37.74 |
| 60-89 | $34.00 |
| 90+ | $30.94 |
HT-9500X8500 has a wall thickness of 0.5 in. The ID is 8.5 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $28.13 |
| 15-59 | $24.98 |
| 60-89 | $22.50 |
| 90+ | $20.48 |
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 4 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
HWT13000X8000 has a wall thickness of 2.5 in. The ID is 8 in and the OD is 13 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $104.64 |
| 5-14 | $91.47 |
| 15-24 | $81.22 |
| 25-49 | $73.17 |
| 50+ | $66.59 |
JIC 500X065 has a 0.5 in in OD and a 0.065 in in thick wall.
JIC tubing is sold in 20 ft. lengths only. Tubes can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Cold drawn and annealed seamless low carbon steel. This tubing is intended for use as hydraulic lines and in other applications requiring flaring and bending.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
Urethane Material | 40 MM Nominal Inner Diameter | Wiper
