Search Results
Filter Your Search
Category Group
Shop by Category
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 3 3/8 in Nominal Inner Diameter | 1/8 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Solid Urethane backup ring with a flat cross-section.
95A Durometer | Urethane Material | 2 5/8 in Nominal Inner Diameter | 3/16 in Cross Section | Backup Ring
Features
- High strength and abrasion resistance
- Wide temperature range
- Chemical resistance
- Low friction
- Easy installation
Style 870 u-seals are precision molded from Buna-N synthetic rubber. Style 870 u-seal numbers conform in size to Army-Navy specification AN6226.
70A Durometer | Buna-N Rubber Material | 3 1/4 in Nominal Inner Diameter | U-Seal
ALUM-10130 has a 10.13 in diameter. The material is 6061 Aluminum T6
6061 Aluminum T6 is suitable for machining pistons and head glands.
The T6 refers to the temper or degree of hardness. T6 has been solution heat treated and artificially aged to provide the maximum yield strength for a 6061 aluminum alloy.
- Heat treated and aged for increased strength
- Easily formed
- Weldable
- Corrosion resistant
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $59.54 |
| 15-29 | $53.64 |
| 30+ | $48.81 |
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 8 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
90A Durometer | Urethane Material | 4 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | Head Seal
HT-5500X4500 has a wall thickness of 0.5 in. The ID is 4.5 in and the OD is 5.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $13.67 |
| 15-59 | $11.95 |
| 60-119 | $10.61 |
| 120+ | $9.56 |
