Browse Categories

Snap-in Wipers for Sale | CRC Distribution

Search in Category

Snap-in Wipers

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...
Seals/Wipers/Snap-in Wipers 
Viewing Page 51 of 121 (1,203 results)
MSWS-16X24X4 | RW-URE-16X24X4 | CRC Distribution Inc.

This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.

Urethane Material | 16 MM Inner Diameter | Wiper

Features

  • Double-stepped shoulder

$2.36
/EA
MSWXE-36X43.6X4.2T | WR-BTFE/NBR-36.00x43.60x4.20 | CRC Distribution Inc.

MSWXE-T is a two piece single acting wiper which consists of a PTFE ring and an O-Ring energizer. This unique style provides low friction, free stick-slip, and a high sliding speed.

PTFE/NBR Material | 36 MM Inner Diameter | Wiper

$11.99
/EA

The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

55D Durometer | Polyester Material | 200 MM Inner Diameter | Wiper

Features

  • Crush lip design provides effective seal on housing
  • Ribs relieve pressure and improve stability
  • Effective scraping lip to scrape off heavily deposited containments including ice

$81.70
/EA

A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.

90A Durometer | Urethane Material | 1 1/8 in Nominal Inner Diameter

Features

  • Slotted heel design
  • Slots in the heel allow excess hydraulic fluid to bypass the wiper

$3.31
/EA

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 1 7/8 in Nominal Inner Diameter

Features

  • Flexible enough to snap into a groove
  • Wipers are constructed of fluorocarbon

$4.90
/EA

A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.

90A Durometer | Urethane Material | 2 in Nominal Inner Diameter

Features

  • Slotted heel design
  • Slots in the heel allow excess hydraulic fluid to bypass the wiper

$6.73
/EA

A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.

90A Durometer | Urethane Material | 5 in Nominal Inner Diameter

Features

  • Slotted heel design
  • Slots in the heel allow excess hydraulic fluid to bypass the wiper

$16.46
/EA

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 5 3/4 in Nominal Inner Diameter

Features

  • Crush lip to provide extra interference
  • Bead on the shoulder to keep contaminants out
  • Ribbed ID to prevent pressure traps

$29.32
/EA

The ST-XLFT was developed for hard environments, particularly longwall mining. These wipers include a dust lip to prevent contaminates from entering through the groove. They also have a ribbed inside diameter for low friction operation and to prevent pressure traps between the wiper and rod seal.

93A Durometer | Urethane Material | 6 in Nominal Inner Diameter

Features

  • Include a dust lip to prevent contaminates from entering through the groove
  • Ribbed inside diameter for low friction operation
  • Prevent pressure traps between the wiper and rod seal

$59.05
/EA
AN-14 | 1 5/16 X 1.616 X .107 AN Wiper URE | CRC Distribution Inc.

AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.

90A Durometer | Urethane Material | 1 5/16 in Nominal Inner Diameter

Features

  • Flexible, snap-in design for easy installation into closed housings
  • Low compression set

$1.54
/EA
  • « PREV
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • NEXT »