Browse Categories

Snap-in Wipers for Sale | CRC Distribution

Search in Category

Snap-in Wipers

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...
Seals/Wipers/Snap-in Wipers 
Viewing Page 48 of 121 (1,203 results)
MSWN-50X62X6 | RW-90NBR-50x62x6 | CRC Distribution Inc.

This medium duty wiper is molded in nitrile rubber.

Nitrile Material | 50 MM Inner Diameter | Wiper

$5.07
/EA
MSWN-63X73X5 | RW-90NBR-63x73x5 | CRC Distribution Inc.

This medium duty wiper is molded in nitrile rubber.

Nitrile Material | 63 MM Inner Diameter | Wiper

$5.68
/EA
MSWS-70X78X4 | RW-90NBR-70x78x4 | CRC Distribution Inc.

This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.

Urethane Material | 70 MM Inner Diameter | Wiper

Features

  • Double-stepped shoulder

$3.60
/EA

The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

55D Durometer | Polyester Material | 25 MM Inner Diameter | Wiper

Features

  • Crush lip design provides effective seal on housing
  • Ribs relieve pressure and improve stability
  • Effective scraping lip to scrape off heavily deposited containments including ice

$16.05
/EA

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 2 5/8 in Nominal Inner Diameter

Features

  • Flexible enough to snap into a groove
  • Wipers are constructed of fluorocarbon

$5.86
/EA

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 5 in Nominal Inner Diameter

Features

  • Crush lip to provide extra interference
  • Bead on the shoulder to keep contaminants out
  • Ribbed ID to prevent pressure traps

$21.25
/EA

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. “V” tagged wipers are constructed of fluorocarbon.

90A Durometer | Urethane Material | 3/4 in Nominal Inner Diameter

Features

  • Flexible enough to snap into a groove
  • Wipers are constructed of fluorocarbon

$3.31
/EA

Medium Duty Buna Wiper with a crush lip providing interference in the groove helping to eliminate contaminants entering through the groove.

Buna-N Material | 1 1/4 in Inner Diameter | Wiper

$3.76
/EA

Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.

90A Durometer | Urethane Material | 1 3/4 in Nominal Inner Diameter

Features

  • Urethane Wiper Ring
  • Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
  • Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F

$15.14
/EA

Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.

90A Durometer | Urethane Material | 5 1/2 in Nominal Inner Diameter

Features

  • Installed in hydraulic cylinders to prevent dirt, dust, and moistures
  • Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components

$49.46
/EA
  • « PREV
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • NEXT »