Browse Categories

Snap-in Wipers for Sale | CRC Distribution

Search in Category

Snap-in Wipers

Filter Your Search

Show Attribute Nominal Inner Diameter
Show Attribute Nominal Outer Diameter
Hide Attribute Unit of Measure

Shop by Category

Loading...
Seals/Wipers/Snap-in Wipers 
Viewing Page 55 of 121 (1,203 results)
MSWP-45X53X4 | RW-90URE-45x53x4 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 45 MM Inner Diameter | Wiper

$9.37
/EA
MSWP-50X58X5 | RW-90URE-50x58x5 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 50 MM Inner Diameter | Wiper

$10.50
/EA
MSWP-75X83X4 | RW-90URE-75x83x4 | CRC Distribution Inc.

This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.

Urethane Material | 75 MM Inner Diameter | Wiper

$12.92
/EA

Molded in nitrile, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder. It features a double-stepped shoulder to fit tightly in the gland throat.

90A Durometer | Nitrile Material | 45 MM Inner Diameter | Wiper

$6.20
/EA

Molded in nitrile, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder. It features a double-stepped shoulder to fit tightly in the gland throat.

90A Durometer | Nitrile Material | 70 MM Inner Diameter | Wiper

Features

  • Double-stepped shoulder

$7.28
/EA

Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.

  • Double-stepped shoulder
$2.71
/EA

The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

55D Durometer | Polyester Material | 35 MM Inner Diameter | Wiper

Features

  • Crush lip design provides effective seal on housing
  • Ribs relieve pressure and improve stability
  • Effective scraping lip to scrape off heavily deposited containments including ice

$14.53
/EA

RW-55D URE-75.00×87.20×7.20

$23.73
/EA

Molded in nitrile, this double lipped wiper is common in Toyota lift trucks.

Nitrile Material | 25 MM Inner Diameter | Wiper

$12.68
/EA

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style “ST” or “D” wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminates from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

94A Durometer | Urethane Material | 1 3/16 in Nominal Inner Diameter

Features

  • Crush lip to provide extra interference
  • Bead on the shoulder to keep contaminants out
  • Ribbed ID to prevent pressure traps

$3.96
/EA
  • « PREV
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • NEXT »