Head Seals for Hydraulic Cylinders
Search in Category
Filter Your Search
Shop by Category
MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.
95A Durometer | Urethane Material | 74.6 MM Nominal Inner Diameter | Cover Seal
MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.
95A Durometer | Urethane Material | 80.1 MM Nominal Inner Diameter | Cover Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 101.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 106.6 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 26.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 30.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 45.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 49.9 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 54.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 57.6 MM Nominal Inner Diameter | Head Seal