Browse Categories

Head Seals for Hydraulic Cylinders

Search in Category

Head Seals

Filter Your Search

Show Attribute Material
Hide Attribute Unit of Measure

Shop by Category

Loading...
Seals/O-rings/Head Seals 
Viewing Page 5 of 7 (65 results)

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 20.6 MM Nominal Inner Diameter | Head Seal

$6.81
/EA

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 22 MM Nominal Inner Diameter | Head Seal

$10.75
/EA

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 30.9 MM Nominal Inner Diameter | Head Seal

$6.88
/EA

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 35.2 MM Nominal Inner Diameter | Head Seal

$10.95
/EA

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 73.6 MM Nominal Inner Diameter | Head Seal

$10.95
/EA

Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

93A Durometer | Urethane Material | 74.4 MM Nominal Inner Diameter | Head Seal

$11.16
/EA

Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

90A Durometer | Urethane Material | 3 5/8 in Nominal Inner Diameter | 1/8 in Cross Section | Head Seal

$17.65
/EA

Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

90A Durometer | Urethane Material | 5 1/8 in Nominal Inner Diameter | 1/8 in Cross Section | Head Seal

$22.08
/EA

Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.

90A Durometer | Urethane Material | 5 7/8 in Nominal Inner Diameter | 3/16 in Cross Section | Head Seal

$32.65
/EA

MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.

95A Durometer | Urethane Material | 64.4 MM Nominal Inner Diameter | Cover Seal

$4.86
/EA
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • NEXT »