Head Seals for Hydraulic Cylinders
Search in Category
Filter Your Search
Shop by Category
Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
90A Durometer | Urethane Material | 5 in Nominal Inner Diameter | 3/16 in Cross Section | Head Seal
MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.
95A Durometer | Urethane Material | 39.5 MM Nominal Inner Diameter | Cover Seal
MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.
95A Durometer | Urethane Material | 44.4 MM Nominal Inner Diameter | Cover Seal
MCVR84 urethane cover seals are designed to replace O-rings for most hydraulic applications, eliminating common problems such as twisting and tearing as well as the need for a backup ring at high pressures. Cover seals may also be used as a double acting seal in many hydraulic applications previously using a conventional O-ring to provide better wear characteristics and greater resistance to extrusion.
95A Durometer | Urethane Material | 170 MM Nominal Inner Diameter | Cover Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 113 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 115.8 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 148.4 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 156.6 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 15.6 MM Nominal Inner Diameter | Head Seal
Molded in Zurcon ® Z20 93A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
93A Durometer | Urethane Material | 191.6 MM Nominal Inner Diameter | Head Seal