Wipers
Filter Your Search
Category Group
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
Urethane Material | 50 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 35 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 60 MM Nominal Inner Diameter | Wiper
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.
55D Durometer | Polyester Material | 25 MM Inner Diameter | Wiper
Features
- Crush lip design provides effective seal on housing
- Ribs relieve pressure and improve stability
- Effective scraping lip to scrape off heavily deposited containments including ice
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.
55D Durometer | Polyester Material | 36 MM Inner Diameter | Wiper
Features
- Crush lip design provides effective seal on housing
- Ribs relieve pressure and improve stability
- Effective scraping lip to scrape off heavily deposited containments including ice
The style MW38 wiper is made from tough abrasion resistant polyester based material for difficult conditions found in mining and earth moving applications. It incorporates a sealing lip on the outside diameter to prevent moisture entering the groove.
55D Durometer | Polyester Material | 80 MM Inner Diameter | Wiper
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 1 1/8 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 3 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.
Urethane Material | 55 MM Nominal Inner Diameter | Wiper
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
Urethane Material | 40 MM Inner Diameter | Wiper
