Wipers
Filter Your Search
Shop by Category
Double lip wiper with integrated pressure relief function incorporating special sealing and wiping edges.
94A Durometer | Urethane Material | 48 MM Inner Diameter | Wiper
This wiper is molded from high grade urethane and bonded to a carbon steel case in a single lip design.
Urethane Material | 32 MM Nominal Inner Diameter | Wiper
AN wipers are ideal for light duty and pneumatic applications. Its main purpose is to prevent dirt and contaminants from entering the hydraulic or pneumatic systems. Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 1/2 in Nominal Inner Diameter
Features
- Flexible, snap-in design for easy installation into closed housings
- Low compression set
Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 1 3/4 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
93A Durometer | Urethane Material | 2 1/2 in Nominal Inner Diameter
Features
- Prevents contaminant ingression at the wiping lip and around the outer case
- Double lip of urethane
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 3 1/2 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
Urethane Material | 70 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
Urethane Material | 75 MM Nominal Inner Diameter | Wiper
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 1 1/2 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F