Wipers
Filter Your Search
Category Group
Material
Nominal Height
Nominal Inner Diameter
Nominal Outer Diameter
Unit of Measure
Shop by Category
This light duty wiper is molded in polyurethane and features a double-stepped shoulder to fit tightly in the gland throat.
Urethane Material | 42 MM Inner Diameter | Wiper
Features
- Double-stepped shoulder
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 25 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 45 MM Nominal Inner Diameter | Wiper
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
Nitrile Material | 45 MM Nominal Inner Diameter | Wiper
Suffix “SH” designates slotted heel design, “V” designates fluorocarbon material, and “B” designates carboxilated nitrile material.
90A Durometer | Urethane Material | 1 3/8 in Nominal Inner Diameter
Features
- Slotted heel design
- Slots in the heel allow excess hydraulic fluid to bypass the wiper
Wipers are installed in hydraulic cylinders to prevent dirt, dust, and moisture from entering the cylinder as they retract back into the system. A hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components.
Nylon Material | 1 in Nominal Inner Diameter | Snap-in Wiper Ring
Features
- Installed in hydraulic cylinders to prevent dirt, dust, and moistures
- Hydraulic wiper prevents contamination that could damage wear rings, seals, and other cylinder components
Suffix “V” designates fluorocarbon material,“N” designates nitrile material, and “HT” designates high temperature urethane.
90A Durometer | Urethane Material | 3 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Min. Temperature Range of ‘-40 °F; N: -40°; V: -20 °F; HT: -40 °F
- Max. Temperature Range of 200 °F; N: 225 °F; V: 350 °F; HT: 225 °F
Suffix “N” designates nitrile material.
90A Durometer | Urethane Material | 1 1/4 in Nominal Inner Diameter
Features
- Urethane Wiper Ring
- Temperature range of -40 °F to 200 °F
Utilizing a double lip of urethane bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
Urethane Material | 50 MM Nominal Inner Diameter | Wiper
