Piston Seals

A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.

PTFE; Nylon; Rubber Material | 2.126 in Nominal Inner Diameter | Capped Piston T-Seal

Features

• Glass-filled PTFE cap, nylon back-up, rubber energizer

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 44 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Totally interchangeable with Style PS1400 PTFE piston seals, Style PS1500 piston seals are molded from tough 60 Shore D durometer polyurethane. During the molding process, a .002” thick band of molybdenum disulfide is molded into the outside diameter of the seal ring for reduced friction. PS1500 piston seals are easily stretched over the piston and recover rapidly with the elimination of the “cold flow” characteristics found in PTFE seals. Piston diameter “I” dimensions are given for pistons without wear rings.

60 Shore D Durometer | Polyurethane Material | 2.856 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances. Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

Buna-N Rubber Material | 1 1/4 in Nominal Inner Diameter | Piston T-Seal

This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear.

PTFE Material | 157 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

A double acting piston seal with many features: Two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.

97A; 70A Durometer | Urethane Material | 34 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.

70A Durometer | NBR Material | 47 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings are required.

70A Durometer | NBR Material | 65 MM Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Piston diameter “I” dimensions are given for pistons without wear rings.

15% Glass Filled PTFE Material | 3.603 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities

Manufactured from 55 Shore D polyester reinforced with <5% glass fiber, style PS1708 offers compact, low friction sealing for light to medium duty hydraulic cylinders. Style PS1708 is easily stretched over the piston without needing to be resized as in the PS1800 seals. Directly interchangeable with style PS1800 and PS1850 piston seals. Piston diameter “I” dimensions are given for pistons without wear rings.

70A Durometer | Poly-Trel™ Thermoplastic Material | 3 7/16 in Nominal Inner Diameter | Piston Seal

Features

• Easy assembly
• Low friction capabilities