Search Results
Filter Your Search
Category Group
Shop by Category
CPOD1750X1000 has a wall thickness of 0.375 in. The ID is 1 in and the OD is 1.75 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $9.20 |
| 15-29 | $7.66 |
| 30-59 | $5.75 |
| 60-104 | $5.11 |
| 105+ | $4.60 |
CPOD4000X3250 has a wall thickness of 0.375 in. The ID is 3.25 in and the OD is 4 in. The material is 1026 Carbon Steel with chrome plating on the Outside Surface.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $19.45 |
| 15-29 | $16.19 |
| 30-59 | $12.15 |
| 60-104 | $10.79 |
| 105+ | $9.72 |
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 2.52 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 3.02 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance, and wearability. T-seals with “BR” suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.
PTFE; Nylon; Rubber Material | 3.77 in Nominal Inner Diameter | Capped Piston T-Seal
Features
- Glass-filled PTFE cap, nylon back-up, rubber energizer
These lip-type buffer seals are designed for replacement in Caterpillar® cylinders. The hinged-lip design reduces friction, heat, and wear under low-pressure conditions and acts as a check valve allowing back-pressure relief. Seals for rod sizes 2-1/8” and under do not have a back-up ring.
Urethane Material | 2 1/8 in Nominal Inner Diameter | Buffer Seal
1.375in DETACHABLE CLEVIS BRACKET
DEB-17 has a 1.75 in pin diameter.
The detachable eye bracket mounts to the rear end of a cylinder and helps prevent sideloading and wear. Can be used with hydraulic cylinders that have a standard bore size.
Threaded at the base with a pin hole inside of the spherical bearing. Order to fit piston rod thread size.
Rubber Material | 5/8 in Nominal Inner Diameter | Wiper
Rubber Material | 5/8 in Nominal Inner Diameter | Wiper
