Search Results
Filter Your Search
Category Group
Shop by Category
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum, life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and, prevents air and contaminants from entering the cylinder.
92A Durometer | Urethane Material | 2 3/4 in Nominal Inner Diameter | 1/4 in Cross Section | U-Seal
Features
- General purpose rod seal
- Robust design
- Excellent wear resistance
- Increase seal stability
- Performs well over wide temperature range and is extremely effective in low temperatures
- Primary lip protection
- Easy to install
HT-6250X5500 has a wall thickness of 0.375 in. The ID is 5.5 in and the OD is 6.25 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $12.05 |
| 15-59 | $10.54 |
| 60-104 | $9.36 |
| 105+ | $8.43 |
Molded in 90A urethane, this seal was developed to be used as a head seal and to replace an o-ring and a back-up. Its symmetrical one-piece design reduces the risk of installation damage and back-up blow-out.
90A Durometer | Urethane Material | 4 3/4 in Nominal Inner Diameter | 1/8 in Cross Section | Head Seal
HT-9500X8500 has a wall thickness of 0.5 in. The ID is 8.5 in and the OD is 9.5 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-14 | $28.13 |
| 15-59 | $24.98 |
| 60-89 | $22.50 |
| 90+ | $20.48 |
HWT13000X8000 has a wall thickness of 2.5 in. The ID is 8 in and the OD is 13 in. The material is 1026 Carbon Steel.
Heavy Wall Tubes are used for machining high strength and close tolerance parts like bushings, axles, hydraulics, and sleeves.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
| 1-4 | $104.64 |
| 5-14 | $91.47 |
| 15-24 | $81.22 |
| 25-49 | $73.17 |
| 50+ | $66.59 |
JIC 500X065 has a 0.5 in in OD and a 0.065 in in thick wall.
JIC tubing is sold in 20 ft. lengths only. Tubes can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Cold drawn and annealed seamless low carbon steel. This tubing is intended for use as hydraulic lines and in other applications requiring flaring and bending.
Full mill lengths will be cut to lengths between 12 ft and 19 ft long. Packages longer than 44 inches may have additional freight charges.
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal. Bronze-filled Teflon rod buffer seal with a rubber energizer.
Bronze Filled PTFE Material | 1 1/2 in Nominal Inner Diameter | Buffer Seal
