Hallite Piston Seal
SKU:
PS714-5000-375
PS714-5000-375 Glass Filled Nylon Piston Seal | 4.24 in ID
This two piece piston seal design comes made with a heat-stabilized, thermoplastic step-cut ring along with a profiled NBR energizer. This product offers extreme strength and resistance to extrusion, a very high resistance to abrasion, and ease of installation thanks to the step cut design and chamfered edges. The design also allows the seal to pass over ports without damage and offers greater resistance to surface roughness in comparison to any elastomer seals. The profiled energizer offers improved dynamic sealing ability, responding quickly to pressure changes and providing excellent sealing characteristics under a wide range of pressure conditions.
$46.60 / EA
Glass Filled Nylon Material | 4.24 in Nominal Inner Diameter | Piston Seal
Features
- Easy assembly
- Low friction capabilities
Item Specifications
-
5 Inch
-
+0.004, +0.000
-
Rubber
-
4.24 Inch
-
+0.000, -0.003
-
0.375 Inch
-
+0.008, +0.000
-
Hallite
-
Glass Filled Nylon
-
230 °F
-
-40 °F
-
3/8 Inch
-
4.24 Inch
-
5 Inch
-
4.999 Inch
-
+0.000, -0.080
-
0 to 7250 psi
-
Unlimited
-
3 ft/sec
-
PS714
-
inch
-
0.09 lbs per EA