U25-3.00-37DZ 95A 70A Urethane Nitrile Rubber Z-Seal | 3 in ID 1/4 in CS
SKU:
U25-3.00-37DZ
U25-3.00-37DZ 95A 70A Urethane Nitrile Rubber Z-Seal | 3 in ID 1/4 in CS
The Z-Seal™ is a squeeze type seal, combining the excellent sealability and low compression set of a resilient rubber lip with the greater anti-extrusion characteristics of a hard thermoplastic base. Under low pressure conditions, the sealing lip provides its own compressive seal force. As pressure increases, hydrostatic pressure is mechanically transmitted through the elastomeric seal element into the anti-extrusion base. The applied force then deflects radially in a controlled manner, closing the extrusion gap behind the sealing lip. Under this condition, maximum sealing effectiveness is achieved.
$26.26 / EA
95A 70A Durometer | Urethane Nitrile Rubber Material | 3 in Nominal Inner Diameter | 1/4 in Cross Section | Z-Seal
Export To PDF
Item Specifications
-
Symmetrical
-
3.5 Inch
-
+0.003, +0.000
-
1/4 Inch
-
95A
-
70A
-
3 Inch
-
+0.000, -0.003
-
0.413 Inch
-
+0.015, +0.000
-
+0.012, -0.020
-
3.5 Inch
-
+0.003, +0.000
-
Urethane
-
Nitrile Rubber
-
200 °F
-
-40 °F
-
3/8 Inch
-
3 Inch
-
3 1/2 Inch
-
3.499 Inch
-
+0.000, -0.002
-
0 to 5000 psi
-
3 Inch
-
+0.000, -0.002
-
DZ
-
3 ft/sec
-
3.001 Inch
-
+0.003, +0.000
-
inch
-
0.04 lbs per EA
